SK-2 Grassland injector

Well thought-out construction

The SK grassland injector has a carefully considered main frame design constructed of special steel and therefore has a low unladen weight. Due to the track and ground following elements, this liquid fertiliser injector requires little pulling power, resulting in lower fuel consumption.

Good distribution

The Slootsmid distributor is placed high and ensures precise and optimal distribution over the entire working width. Together with the unique continuous hoses with steel spiral and 50 mm inner diameter, this ensures perfect flow and prevents blockages. The injector can optionally be equipped with hydraulic shut-offs and can be fitted with central or automatic lubrication.

Optimal slurry utilisation

Thanks to the narrow disc, the slurry injector enters the soil well with little pressure, even under the toughest conditions. The slender coulter makes a rectangular slot, and the unique rubber discharge nozzle ensures good filling of the furrow without splashing. This ensures shallow injection of all the fertilisers, where they are put to optimal use.

The slurry outlets of the element are spaced at 20 cm intervals, and the pre-cutting discs are fitted with greaseable bearings. The element reduces the number of pivot points, resulting in reduced wear and savings on maintenance costs.

The elements are suspended on maintenance-free, track-and-ground-following pivots. The elements have a disc diameter of 250 mm. Elements are fitted with pre-cutting discs, coulter blades and automatic coulter valves.

Universal linkage

As standard, the SK slurry injector is fitted with a Slootsmid 3- or 4-point linkage, making it easy to hitch and unhitch. The slurry injector can be fitted behind almost any brand and type of tanker.

If you prefer an injector with DUO elements, take a look at the Slootsmid SZB Injector. This is available with a 250 mm thin disc or with a convex disc.